FB092 Bronze-Wrapped Bearing Bushings Can Improve The Carrying Capacity

     Structure Characteristics and Applications:

     FB092 wrapped bronze bushing is made of tin-bronze CuSn8 that is of high density, its surface is punched with oil 

apetures by certain angle and density therefore its easier to form an oil film when the bushing works. It has good anti-

fatigue and load, anti-erosion anti-abrasion and load capacity. The products are widely applied in conditions of heavy load 

but low running velocity, such as on agricultural, building and engineering machines.

     FB092 Material Structure:

     FB092 is deriving from FB090, the defference between FB090 & FB092 is indentations on working surface, which substituted 

by through-holes.

     These holes will allow greater capacity to collect lubricant, which build up a lubrication film at the start of movement 

and reduce the frication.

     It is suitable for high load, lower speed application like construction, transport, and agriculture machinery.

     Product Benefits:

     1.Saving large amount of bronze material and save the working hours normally spent for lathing the bronze bushing.

     2.Compared with lathed bushings and roller bearings, it is lights and more cost-effective.

     3.Various holes and dents can be made on the frication surface for grease storage, prolonging the lubrication interval 

to 5 times as long as required by the bronze bushing.

     4.Exremely high load sustainability, especially suitable for coarse abrasion surfaces.

     Standard products available: atraight bushings, thrust plates and pressure bearings.

     Non-standard products available: straight bushings, thrust plates, bearing bushings, slide plates and steel bushing